这是一个纸上水彩安装在板。直到现在我一直使用分层技术主要用水彩画画,因为我发现这画像是一个伟大的方式来传达微妙的色调的皮肤,避免硬边。对于这个话题我想试试技术涂料乌云和海。
我做在纸上水彩绘画在板前我开始画画。如果你有兴趣,你可以阅读技术贴在这里:船上安装水彩画纸
当分层水彩画我总是从黄色层作为我要用黄土,这是最不透明的颜色我将使用。
我开始画只有黄赭色水彩。我湿润的纸用纯水在我开始画天空,所以我确信所有的边缘将保持柔软。我也创造一些白色区域通过去除漆用纸巾纸
对于蓝色层我想用两个色调的蓝色,一个温暖的深蓝色和冷钴翠蓝
一旦黄色层完全干我开始添加一层深蓝色大海。当我开始画小船干燥并添加细节到海边。
画前云,我保护船我只是涂上掩蔽流体所以我可以画大姿态和没有深蓝色的船上流血向天空
我也使用遮蔽胶带保持一个干净的海洋和天空之间的边缘。
我然后润湿天空面积与普通水画云之前,我使用深蓝色在上部和下部钴。
为红层我要使用Alazarin深红色水彩。
然后我添加一个很轻的一层红色的天空和海地区,我也添加一些红色的船只
最后一步我服用是擦洗掉一点颜色用硬刷和大量的水,然后添加更多了一层薄薄的白水粉颜料。
原文如下:
This is a watercolor on paper mounted on board. Until now I have been using a layering technique with watercolors mostly for portraits because I find this is a great way to convey the subtle tones of skin and to avoid hard edges. For this subject I wanted to try that technique to paint the clouds and the sea.
I did mount the watercolor paper with my drawing on board before I start painting. If you are interested in that technique you can read the post here: Mounting Watercolor paper on board
When layering watercolors I am always starting with the yellow layer as I am going to be using Yellow Ocher and this is the least transparent of all the colors I will use.
I start painting only with yellow ocher watercolor. I am wetting the paper with plain water before I start painting the sky, so I am sure all the edges will stay soft. I am also creating some white areas by removing paint with a tissue paper
For the blue layer I want to use two tones of blue, a warmer ultramarine blue and a colder Cobalt Turquoise blue
Once the yellow layer is completely dry I start adding a layer of Ultramarine blue to the sea.When dry I start painting the boats and add details to the sea.
Before painting the clouds, I protect the boats I just painted with masking fluid so I can paint with large gesture and not have the dark blue on the boats bleed into the sky
I am also using masking tape to keep a clean edge between the sea and sky.
I am then wetting the sky area with plain water before painting the clouds, I am using ultramarine on the top part and cobalt on the lower part.
For the red layer I am going to use Alazarin crimson watercolor.
I then add a very light layer of red on the sky and sea areas,I am also adding some red to the boats
The last step I am taking is scrubbing off a bit of color with a stiff brush and lots of water, then adding a bit more white with a fine layer of gouache.